On a hot summer day the water in a small country pool is heated obviously. After the weather is heat time is extended or, in general, the temperature doesn’t achieve a comfortable temperature of +22oC. In large pools organic heating takes much longer. To solve this problem, created a heater to the pool, working out of different energy resources.

Heat exchanger

The simplest water heater for your swimming pool is a heat exchanger. The basis of the design is a tank, by which the hot liquid flows. It’s connected to the heating system or some other flowing water heater. Within the tank is a built-in coil. This part is the heat exchanger. Pool water slides throughout the coil, warmth against the liquid inside the tank.

Why do you want such a complicated pool heater if you’re able to just run on the water directly through the heater? You can use such a strategy, however there are two problems:

If heated, they settle on the walls of the heat exchanger because of good sludge, clogging it.

  • Pool water is saturated in oxygen, which divides the metallic walls of the heat exchanger.
  • To expensive boiler or leak heater does not fail, the heating system has another loop. The heat exchanger is simpler and cheaper to change if it becomes clogged or leaks from oxidation of the walls.

    Self-made heat exchanger – a coil of pipes connected to the heating apparatus. In a tiny children’s pool piping is set on the principle of the system“underfloor heating system“. A little bit of water that the coil will heat quickly, and using a huge volume won’t cope. Electric versions

    The second most popular is the electrical heater for your pool, composed of a machine, heating elements along with a thermostat. Devices come in two types:

    • Accumulation. The system is made up of massive tank, in which the water is heated by the heating components, and from that point it’s fed to the pool. The unit is linked to the water treatment method of their pool. There is a filter in the front of the water heater, which moves purified water, which gets rid of the creation of solid deposits.
    • Based on the capability, the apparatus are linked to single-phase and systems that are interpersonal.

    The requirement to warm a massive amount of water demands the usage of strong devices. Electricity costs are enormous, plus you will need to put another field of wiring. Heating pump

    Rather complicated in the machine of this heater for the pool pump describes advanced technology. The unit is effective and cost-effective, remonttool.ru but it’s rarely used because of its high price.

    Significant: The heat pump operates to the principle of the fridge, only here the circuit which releases heat, not cold, is in demand.

    The machine is composed of 2 circuits, inside which the fluid circulates. The outer pipe can be laid underground, at the bottom of the window or alternative place at which you are able to extract heat. The inner circuit is put in the pool. It supplies the water the heat extracted by the outer tube.